Product Code:SAE J1979
Title:E/E Diagnostic Test Modes
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope: This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.
Rationale: This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.【英文标准名称】:Domesticgas-firedforcedconvectionairheatersforspaceheatingnotexceedinganetheatinputof70kW,withoutafantoassisttransportationofcombustionairand/orcombustionproducts
【原文标准名称】:不用风扇辅助传输燃气和/或燃烧产物的空间净加热输入功率不超过70kW的家用燃气强制对流空气加热器
【标准号】:BSEN778-2009
【标准状态】:现行
【国别】:英国
【发布日期】:2009-11-30
【实施或试行日期】:2009-11-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:通路;可及性;通气;空气分配;建筑物服务设施;燃烧器;燃烧特性;燃烧安全;类别;CE标记;分类;燃烧所需空气;交付使用;结构要求;建筑工程;控制设备;控制器;对流;对流式加热器;定义;设计;偏差;家用的;效率;排气管路;废气;风扇;点火电路;火焰控制装置;火焰监视;火焰;烟道排放物;燃气器具;燃气燃烧器;燃气燃烧;燃气连接;石油气;燃气燃烧装置;气体流动;气体加热器;燃气技术;气阀;气体;燃气动力装置;热学;热负载;加热器;加热;热空气循环对流加热器;加热设备;家用;点火;点火装置;说明书;使用说明书;维护;维护说明书;标志;测量条件;多重调节装置;额定热负荷;操作安全;污染物;预先布置;压力;压力调节器;丙烷;保护设备;合格试验;房屋;安全;安全工程;对流式供暖系统;规范(验收);监督(认可);试验气体;试验压力;测试;建筑物热工设计;热环境系统;密封性;运输;类型;阀门;热空气加热器;热风供暖;沃泊指数
【英文主题词】:Access;Accessibility;Aeration;Airdistribution;Buildingservices;Burners;Burningbehaviours;Burningsafety;Categories;CEmarking;Classification;Combustionair;Commissioning;Constructionrequirements;Constructions;Controlequipment;Controllers;Convection;Convectionheaters;Definitions;Design;Deviations;Domestic;Efficiency;Exhaustgaslines;Exhaustgases;Fans;Firingcircuits;Flamecontroldevices;Flamemonitoring;Flames;Flueemissions;Gasappliances;Gasburners;Gasburning;Gasconnections;Gasfamilies;Gasfiringsystem;Gasflow;Gasheaters;Gastechnology;Gasvalves;Gases;Gas-powereddevices;Heat;Heatload;Heaters;Heating;Heatingconvectors;Heatingequipment;Householduse;Ignition;Ignitiondevices;Instructions;Instructionsforuse;Maintenance;Maintenanceinstructions;Marking;Measurementconditions;Multipleadjustingdevices;Nominalthermalload;Operationalsafety;Pollutants;Preset;Pressure;Pressureregulators;Propane;Protectiondevices;Qualificationtests;Rooms;Safety;Safetyengineering;Space-heatingsystems;Specification(approval);Surveillance(approval);Testgases;Testpressure;Testing;Thermaldesignofbuildings;Thermalenvironmentsystems;Tightness;Transport;Types;Valves;Warmairheaters;Warm-airheating;Wobbeindex
【摘要】:ThisEuropeanStandardspecifiestherequirementsandtestmethodsforthesafetyandefficiencyofdomesticgas-firedairheaterswith(an)atmosphericburner(s)andwithoutafantoassistthetransportationofcombustionairand/orfluegases,hereafterreferredtoas"appliances".ThisEuropeanStandardappliestoTypeB11,B11AS,B11BS,B41,B41AS,B41BSC11,C21,C31andC41applianceswithaninputnotexceeding70kW(netcv-basis),intendedprimarilyforuseinsingleunitresidentialdwellings.Provisionoftheheatedairmaybebymeansofducting.ThisEuropeanStandarddoesnotapplyto:a)appliancesofthecondensingtype;b)appliancesforoutdoorinstallation;c)dualpurposeairconditioningappliances(heatingandcooling);d)applianceswheretheairisheatedbyanintermediatefluid;e)applianceswithforceddraughtburners;f)appliancesfittedwithamanualorautomaticmeansofadjustingthecombustionairsupplyorthecombustionproductsevacuation(includingfluedampers);g)portableortransportableforcedconvectionappliances;h)applianceshavingmultipleheatingunitswithasingledraughtdiverter;i)appliancesfittedwithmorethanoneflueoutlet;j)C21andC41appliancesfor3rdfamilygases;NOTEForC41appliances,seeallrequirementsandtestmethodsthatarevalidforC21appliances,unlessotherwisestated.k)appliancesthataredesignedforcontinuouscondensationwithinthefluesystemundernormaloperatingconditions;l)applianceshavingProductsOfCombustionEvacuationDucts(POCED),thatarenon-metallic.ThisEuropeanStandardisapplicabletoapplianceswhichareintendedtobetypetested.Italsoincludesrequirementsconcerningtheevaluationofconformity,includingfactoryproductioncontrol,buttheserequirementsonlyapplytoPOCEDsandtheirassociatedterminals.
【中国标准分类号】:Q83
【国际标准分类号】:97_100_20
【页数】:132P.;A4
【正文语种】:英语